Avid

This axle allows you to increase your wheel diameter without cutting your rails. Plus it puts two wheels next to the rails and keeps the weight inboard. You can go from a 6.375" wheel to an 8" wheel...

These will improve efficiency allowing your track to rotate easier and they are extremely durable for 25mm (1") shaft. These light weight 9 inch idlers come with a premium 6205 Bearing....

We recommend that you use these when you cut off your rail tips to make room for drivers. This is a 2 wheel kit and comes with two limiter straps and all of the necessary hardware. The axle/shaft is...

Avid Products Tail Light Delete. Completely remove your existing tail light and snow flap. This delete saves almost 3/4 of a pound. Gives better clearance between iced up gloves and bumper, and...

Avid Products Tail Tidy. Completely remove your stock tail light and snow flap. This delete saves almost 3/4 of a pound. Gives better clearance between iced up gloves and bumper, and provides less...

These are sold as a set, you will need 1 per snowmobile.

These are sold as a set, you will need 1 per snowmobile.

These are sold as a set, you will need 1 per snowmobile.

These are sold as a set, you will need 1 per snowmobile.

These drivers are similar to the stock drivers found on late model Polaris snowmobiles with center antiratchet drivers. These are sold as a set, you will need 1 per snowmobile. Your track will need to...

These are sold as a set, you will need 1 per snowmobile.

These are sold as a set, you will need 1 per snowmobile.

ID: 71mm

These drivers are similar to the stock drivers found on late model Polaris snowmobiles with center antiratchet drivers. These are sold as a set, you will need 1 per snowmobile. Your track will need to...

These are sold as a set, you will need 1 per snowmobile.